Features:
- the whole production process: melting material, mixing, spraying demoulding agent, pumping material, filling material, cooling, shovel material return, top crayon, grasp crayon, packing;
- heating mode: heating tube, heat conduction oil heating;
- heating parts: barrel, feeding pipeline, feeding trough, feeding pump;
- Mold cooling mode: one inch and a half main water pipe flows into the mold frame from the cold water outlet under the mold, and then flows out from the middle to the middle drainage outlet and drains back to the cooling tank;
- .material pot function: heating, stirring;
- .material pot capacity: 120L;
- spray release agent: release agent after atomization spray on the thimble and die surface;
- Material injection: prepare the material in the material trough through the material pump, and wait for the mold to rotate in place.
- .shovel material: automatically shovel the excess material back to the material pot heating;
- Automatic crayon jacking: automatically jacking out the crayon and putting the crayon on the conveyor belt through the crayon grabbing mechanism;
- Automatic packing: after the manipulator, the crayons on the conveyor belt are caught in the positioning plastic frame, and the discharge is good in order and level. After filling a box, there is an alarm to change the box.
